Sick of struggling to remove oil filters no matter how careful you are not to overtighten them when you did your last oil change? Check out the K&N Oil Filter range, available for a number of models and featuring a 17mm hex nut to allow for easily removal.
K&N Oil Filter
K&N Oil Filter features
- Uniform pleated Synthetic filter media provides high capacity and outstanding filtration
- Premium Synthetic Media allows for high-flow rates associated with Synthetic and Synthetic blended oils
- Protected by a heavy-duty canister and base plate, with a double-rolled seal
- Check-Valve/Anti-drain Back Valve prevents drain-back and dry starts(where applicable)
- Pre-Lubed base gasket provides excellent seal
- 17mm Hex Nut Allows Easy Wrench-Off®
- Pre-drilled for Safety Wire security
- K&N Limited Warranty
K&N motorcycle and car oil filter range
Fitment is easy, just follow these simple steps:
- With a clean cloth or towel, wipe away any remaining used oil or debris from the mounting surface.
- Apply a thin coat of new engine oil to the O-Ring surface of the new oil filter.
- Carefully install the New Oil Filter onto the threads and spin-on until contact is made with the crankcase base.
- With your hand, turn the New Oil Filter ¾ to 1 full turn to fully seat the oil filter. Do not overtighten.
- Start the engine and check for any oil leaks.
K&N Oil and Airfilters for motorcycles are imported by Pro Accessories. Ask at your local motorcycle shop by name for a filter to fit your motorcycle.
You Might Also Like
Submit a Comment
